加好友 
發短信
Post By：2021-11-23 15:06:00 [顯示全部帖子]
ESM7000工控板評估套件，按照http://www.www.jsjflaw.com/case/case20191178.html這個網站的方案，接的USB線和I2C偏平線。ISA EVB評估板上跳線JP19至JP22短接，跳線JP23和JP24斷開。
在終端輸入驅動命令modprobe r8152后，沒有看到驅動加載后，系統生成的eth2-eth5四個新的網絡設備。
root@ESM7000:~# modprobe r8152
root@ESM7000:~# ifconfig
eth0 Link encap:Ethernet HWaddr d0:9b:05:0b:24:c6
inet addr:192.168.201.81 Bcast:192.168.201.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth1 Link encap:Ethernet HWaddr d0:9b:05:0b:24:c7
inet addr:192.168.10.241 Bcast:192.168.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2110 errors:0 dropped:0 overruns:0 frame:0
TX packets:60 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:168057 (164.1 KiB) TX bytes:4780 (4.6 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:1690 errors:0 dropped:0 overruns:0 frame:0
TX packets:1690 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:128416 (125.4 KiB) TX bytes:128416 (125.4 KiB)
是驅動沒有加載成功么？怎么判斷驅動是否加載成功？或者加載成功后怎樣修改對應的IP地址？
